راهنمای تعمیرات واتسماینر
شرکت واتسماینر ابزاری به نام Whatsminer Tool دارد که با آن تمام دستگاه های شرکت واتسماینر کنترل می شود. با این نرم افزار وضعیت دستگاه های ماینر واتسماینر مونیتور می شود ، نرم افزارهای دستگاه ها آپدیت می شود ، و تنظیمات دستگاه ها مثل استخرها و ورکرهای اعمال می گردد، و تنظیمات آیپی استاتیک یا دینامیک اعمال می گردد.
برای دانلود این نرم افزار می توانید به کانال ما مراجعه کنید.
یکی از مهمترین کاربردهای نرم افزارهای whatsminer tools این است که کاربران می توانند مشکلات دستگاه را بررسی کنند. و برای تعمیر آن از کدهای نرم افزاری کمک بجویند.
در اینجا چک لیستی از کدهای خطا دستگاه های واتسماینر آورده می شود
جدول خطای واتسماینر
| Error code | Reason | processing method |
| 110 | Fanin detect speed error | Check whether the fan connection is normal, or replace the power supply, or replace the fan |
| 111 | Fanout detect speed error | Check whether the fan connection is normal, or replace the power supply, or replace the fan |
| 120 | Fanin speed error（Deviation 2000+） | Check whether the fan connection is normal, or replace the power supply, or replace the fan |
| 121 | Fanout speed error（Deviation 2000+） | Check whether the fan connection is normal, or replace the power supply, or replace the fan |
| 130 | Fanin speed error（Deviation 3000+） | Check whether the fan connection is normal, or replace the power supply, or replace the fan |
| 131 | Fanout speed error（Deviation 3000+） | Check whether the fan connection is normal, or replace the power supply, or replace the fan |
| 140 | Fan speed is too high | Please check the environment temperature |
| 200 | Power probing error, no power found | Detecting power output wiring, updating the latest firmware, or replacing power supply |
| 201 | Power supply and configuration file mismatch | Replace the correct power supply |
| 202 | Power output voltage error | Upgrade the latest firmware or check the power supply |
| 203 | Power protecting | Please check the environment temperature |
| 204 | Power current protecting | Please check the environment temperature |
| 205 | Power current error | Inspection of power supply in power grid |
| 206 | Power input voltage is low | Improve power supply conditions and input voltage |
| 207 | Power input current protecting | Improve power supply conditions and input voltage |
| 210 | Power error status | Check power failure code |
| 213 | Power input voltage and current do not match the power | Replace the power |
| 233 | Power output over temperature protection | Please check the environment temperature |
| 234 | Power output over temperature protection | Please check the environment temperature |
| 235 | Power output over temperature protection | Please check the environment temperature |
| 236 | Overcurrent Protection of Power Output | Please check the environment temperature，check copper row screw |
| 237 | Overcurrent Protection of Power Output | Please check the environment temperature，check copper row screw |
| 238 | Overcurrent Protection of Power Output | Please check the environment temperature，check copper row screw |
| 239 | Overvoltage Protection of Power Output | Inspection of power supply in power grid |
| 240 | Low Voltage Protection for Power Output | Inspection of power supply in power grid |
| 241 | Power output current imbalance | Replace the power |
| 243 | Over-temperature Protection for Power Input | Please check the environment temperature |
| 244 | Over-temperature Protection for Power Input | Please check the environment temperature |
| 245 | Over-temperature Protection for Power Input | Please check the environment temperature |
| 246 | Overcurrent Protection for Power Input | Please check the environment temperature |
| 247 | Overcurrent Protection for Power Input | Please check the environment temperature |
| 248 | Overvoltage Protection for Power Input | Inspection of power supply in power grid |
| 249 | Overvoltage Protection for Power Input | Inspection of power supply in power grid |
| 250 | Undervoltage Protection for Power Input | Inspection of power supply in power grid |
| 251 | Undervoltage Protection for Power Input | Inspection of power supply in power grid |
| 253 | Power Fan Error | Replacing power |
| 254 | Power Fan Error | Replacing power |
| 255 | Protection of over power output | Please check the environment temperature |
| 256 | Protection of over power output | Please check the environment temperature |
| 257 | Input over current protection of power supply primary side | Try to power off and restart, no effect to replace the power supply |
| 263 | Power communication warning | Check whether the screws of the control board are locked |
| 264 | Power communication error | Check whether the screws of the control board are locked |
| 267 | Power watchdog protection | Contact the technician in time |
| 268 | Power output over-current protection | Check the ambient temperature, check the copper bar screw |
| 269 | Power input over-current protection | Improve power supply conditions and input voltage |
| 270 | Power input over-voltage protection | Inspection of power supply in power grid |
| 271 | Power input under-voltage protection | Inspection of power supply in power grid |
| 272 | Warning of excessive power output of power supply | Please check the environment temperature |
| 273 | Power input power too high warning | Please check the environment temperature |
| 274 | Power fan warning | Check if the power fan is blocked and may need to be replaced |
| 275 | Power over temperature warning | Please check the environment temperature |
| 300 | SM0 temperature sensor detection error | Check the connection of the hashboard |
| 301 | SM1 temperature sensor detection error | Check the connection of the hashboard |
| 302 | SM2 temperature sensor detection error | Check the connection of the hashboard |
| 320 | SM0 temperature reading error | Check whether the control board screw is locked properly, check the connection board and the arrangement contact |
| 321 | SM1 temperature reading error | Check whether the control board screw is locked properly, check the connection board and the arrangement contact |
| 322 | SM2 temperature reading error | Check whether the control board screw is locked properly, check the connection board and the arrangement contact |
| 329 | Control board temperature sensor communication error | Replace the power supply |
| 350 | SM0 temperature protecting | Please check the environment temperature |
| 351 | SM1 temperature protecting | Please check the environment temperature |
| 352 | SM2 temperature protecting | Please check the environment temperature |
| 410 | SM0 detect eeprom error | Check adapter board and wiring contact |
| 411 | SM1 detect eeprom error | Check adapter board and wiring contact |
| 412 | SM2 detect eeprom error | Check adapter board and wiring contact |
| 420 | SM0 parser eeprom error | Contact the technician in time |
| 421 | SM1 parser eeprom error | Contact the technician in time |
| 422 | SM2 parser eeprom error | Contact the technician in time |
| 430 | SM0 chip bin type error | Contact the technician in time |
| 431 | SM1 chip bin type error | Contact the technician in time |
| 432 | SM2 chip bin type error | Contact the technician in time |
| 440 | SM0 eeprom chip num X error | Contact the technician in time |
| 441 | SM1 eeprom chip num X error | Contact the technician in time |
| 442 | SM2 eeprom chip num X error | Contact the technician in time |
| 510 | SM0 miner type error | The version and type of hashboard are inconsistent, replace the correct hashboard |
| 511 | SM1 miner type error | The version and type of hashboard are inconsistent, replace the correct hashboard |
| 512 | SM2 miner type error | The version and type of hashboard are inconsistent, replace the correct hashboard |
| 530 | SM0 not found | Check the connection and arrangement of the adapter board, or replace the control board, check whether the hash board connector is empty welded |
| 520 | SM0 bin type error | The chip type of the hashrate board is inconsistent, replace the correct hashrate board |
| 521 | SM1 bin type error | The chip type of the hashrate board is inconsistent, replace the correct hashrate board |
| 522 | SM2 bin type error | The chip type of the hashrate board is inconsistent, replace the correct hashrate board |
| 531 | SM1 not found | Check the connection and arrangement of the adapter board, or replace the control board, check whether the hash board connector is empty welded |
| 532 | SM2 not found | Check the connection and arrangement of the adapter board, or replace the control board, check whether the hash board connector is empty welded |
| 540 | SM0 reading chip id error | Check adapter board and wiring contact，Clean the dust on the hashboard |
| 541 | SM1 reading chip id error | Check adapter board and wiring contact，Clean the dust on the hashboard |
| 542 | SM2 reading chip id error | Check adapter board and wiring contact，Clean the dust on the hashboard |
| 550 | SM0 have bad chips | Replacement of bad chips |
| 551 | SM1 have bad chips | Replacement of bad chips |
| 552 | SM2 have bad chips | Replacement of bad chips |
| 560 | SM0 loss balance | Plug in the adapter plate, and then screw in the power connection hashboard again |
| 561 | SM1 loss balance | Plug in the adapter plate, and then screw in the power connection hashboard again |
| 562 | SM2 loss balance | Plug in the adapter plate, and then screw in the power connection hashboard again |
| 600 | Environment temperature is high | Please check the environment temperature |
| 610 | If the ambient temperature is too high in high performance mode, return to normal mode | Check the ambient temperature, high performance mode needs to be controlled below 30 ℃ |
| 710 | Control board rebooted as exception | Updating the latest firmware.Check whether the control board screw is locked properly |
| 712 | Control board rebooted as exception | Updating the latest firmware.Check whether the control board screw is locked properly |
| 800 | cgminer checksum error | Re upgrade firmware |
| 801 | system-monitor checksum error | Re upgrade firmware |
| 802 | remote-daemon checksum error | Re upgrade firmware |
| 2010 | All pools are disable | Please check the network or pools configure |
| 2020 | Pool0 connect failed | Please check the network or pools configure |
| 2021 | Pool1 connect failed | Please check the network or pools configure |
| 2022 | Pool2 connect failed | Please check the network or pools configure |
| 2030 | High rejection rate of pool | Please check the network or pools configure.Setting of mining currency |
| 2040 | The pool does not support the asicboost mode | Check pool configuration |
| 2310 | Hash rate is too low | Check input voltage, network environment, and ambient temperature |
| 2320 | Hash rate is too low | Check input voltage, network environment, and ambient temperature |
| 2340 | The loss of hash rate is too high | Check input voltage, network environment, and ambient temperature |
| 2350 | The loss of hash rate is too high | Check input voltage, network environment, and ambient temperature |
| 5110 | SM0 Frequency Up Timeout | reboot |
| 5111 | SM1 Frequency Up Timeout | reboot |
| 5112 | SM2 Frequency Up Timeout | reboot |
| 8410 | Software version error (M2x miner with M3x firmware, or M3x with M2x firmware). | Upgrade to the correct firmware version |
| 100001 | /antiv/signature Illegal | Re-upgrade the firmware |
| 100002 | /antiv/dig/initd.dig Illegal | Re-upgrade the firmware |
| 100003 | /antiv/dig/pf_partial.dig Illegal | Re-upgrade the firmware |
جدول خطای پاور واتسماینر
| PSU Error code | Reason | processing method |
| 0x0001 | Input voltage is too low,need improvement | Check the power supply |
| 0x0002 | Temperature sampling over temperature protection of power radiator | Power on again after 10 minutes of power failure. If it occurs again, replace the power supply |
| 0x0004 | Temperature sampling over temperature protection of power radiator | Power on again after 10 minutes of power failure. If it occurs again, replace the power supply |
| 0x0008 | Over temperature protection of environmental temperature sampling in power supply | Power on again after 10 minutes of power failure. If it occurs again, replace the power supply |
| 0x0010 | Primary side over current | Power on again after 10 minutes of power failure. If it occurs again, replace the power supply |
| 0x0020 | Output undervoltage | Check the power supply |
| 0x0040 | Output over current (continuous load 320A for more than 2S) | Tighten the copper bar screw again |
| 0x0080 | Primary side over current | Power on again after 10 minutes of power failure. If it occurs again, replace the power supply |
| 0x0100 | Single circuit overcurrent (protection point 120a) | Check the power supply |
| 0x0200 | Single circuit overcurrent (protection point 120a) | Check the power supply |
| 0x0400 | Single circuit overcurrent (protection point 120a) | Check the power supply |
| 0x0800 | Fan failure | Replace the power supply |
| 0x1000 | Output over current (continuous load of 310A for more than 5min) | Check the power supply |
| 0x2000 | Output over current (continuous load 295A for more than 10min) | Check the power supply |
برای مشاهده جدول خطای اینوسیلیکون به این لینک مراجعه نمایید.
برای مشاهده ویدئوهای ما در آپارت لینک زیر را کلیک کنید.
www.aparat.com/ecarly
کانال ما در شبکه های اجتماعی :
@ecarly_ir
باسلام
تشکر از سایت محبوبتان واقعا ادم با این مقاله ها و کدهایی که گذاشتید دیگه دشت به خرابکاری نمی زند البته بشرطی که مشاوران همیشه یا به درستی ساپورت کنند ، فقط یه چیز دیگه مونده ما حاضریم از راه دور ترفمند بدند وهزینه پرداخت کنیم بابت راهنمایی و کاری که درست بشو باشد… این گزینه خیلی برامون مهمه چونکه کد خطا وجود دارد..
باتشکر
متاسفانه اکثر تعمیرکاران ماینر حتی اگر دستکاه ایرادی نداشته باشد چون اکثر دارندگان اطلاعات درستی ندارن. با دریافت مبالغ بسیار زیاد از دارندگان تنها با استفاده غز این کدها دستگاهها را راه اندازی میکنند